The VCS-F85S20-MM is an 850nm multimode VCSEL diode in a compact 1608 (0603) SMD package, delivering 2.2mW CW output for proximity sensing and miniaturized consumer electronics.
-
Ultra narrow spectral linewidth CW diode lasers
Applications: Raman spectroscopy, DNA sequencing, Flow cytometry, Digital imaging, Confocal microscopy -
Narrow linewidth low Noise DPSS lasers
Applications: DNA sequencing, Flow cytometry, Digital imaging, Analytical chemistry, Particle measurements, Confocal microscopy, Raman spectroscopy -
Non-gaussian flat-top beam fiber coupled lasers with even energy distribution spot
Applications: Medical treatment, Ultraviolet curing, Fluorescence detection, Criminal investigation, Scientific research. -
Blue low noise diode lasers up to 3500 mW
Applications: Scientific research, Measurement, Communication, Spectrum analysis -
Water cooled Q-Switched Ti: sapphire tunable laser
Applications: Measurement, Marking, Carving, Military, Scientific research -
Lasermate Group, Inc. provides diode-pumped solid state (DPSS) lasers with low divergence and high power that are suitable for optogenetics application. The wavelengths used for optogenetics research comprise of the entire wavelength spectrum from ultraviolet to violet, blue, green, yellow, and red to multiple wavelengths. -
Lasermate offers diode lasers specially designed for gas detection of CH4, H2S, NH3, H2O, CO, CO2, C2H4, HF, C2H2, etc.
-
Long coherence CW diode lasers
Applications: Holography, Photoetching interference, DNA sequencing, Flow cytometry, Digital imaging, Analytical chemistry, Particle Measurement, Confocal microscopy, Raman spectroscopy -
Lasermate provides different laser sources specifically designed for Raman spectroscopy applications at different kinds of wavelengths and power levels to meet customer’s practical requirements. -
Continuous-wave (CW) fiber laser at 1064nm and 1080nm up to 200W
Applications: Laser radar, Life science, Material processing, Microelectronics, Scientific research, Pump for mid-IR laser, Pump source for OPO, Pump source for long distance communication -
Q-switched pulsed fiber lasers at 532nm, 1064nm and 1550nm
Applications: Laser radar, Life science, Microelectronics, Scientific research, Physical experiment -
Single frequency CW fiber laser at 1064nm and 1550nm
Applications: Acoustic and seismic sensing, Medical cosmetology, LIDAR, Metrology, Wind sensing, Security, Experimental research -
Lasermate Group, Inc. offers a wide selection lasers suitable for holography application. -
Compact UV, visible, and near IR actively AOM Q-switched DPSS lasers up to 2500 mW
Applications: Material processing, Measurement, Scientific research -
High power fiber coupled diode lasers from 793nm to 980nm up to 40 Watts
Applications: Pumping, Scientific research, Industrial, Medical -
Infrared tunable DPSS laser
Applications: Remote sensing, Communication, Spectrum analysis -
Lasermate offers 808nm, 3000mW, multi-emitter Vertical Cavity Surface Emitting Laser (VCSEL) chip designed for use in 3D sensors, lidars, IR illumination, medical, solid-state pump source. -
Lasermate provides highly reliable true single mode 850nm Vertical Cavity Surface Emitting Laser (VCSEL) chip with single longitudinal mode and single transverse mode. Ideal for applications in consumer electronics, laser mouse, laser printer, safety sensor, and engine management system. -
The VCC-85A4G is a high-speed 850nm oxide-confined VCSEL chip capable of supporting data rates up to 4Gbps. Engineered for reliable performance in optical communication systems, it ensures efficient data transmission, making it an ideal choice for modern networking and data center applications. -
The VCC-85B10G is a high-performance 850nm VCSEL chip capable of supporting data rates up to 10Gbps. Designed for non-hermetic applications, it offers excellent efficiency and stability, making it an ideal choice for optical communication systems and high-speed data networks. -
The VCC-85A14G is a cutting-edge multimode VCSEL chip featuring an impressive data rate of 14Gbps at 850nm. Optimized for high-speed optical communication systems, it provides exceptional performance and efficiency, making it perfect for demanding networking and data center environments. -
Lasermate offers 850nm, 700mW, multi-emitter Vertical Cavity Surface Emitting Laser (VCSEL) chip. Designed for use in 3D sensors, lidars, IR illumination, medical application, proximity sensor. -
High-efficiency 940nm VCSEL chip with 350mW output power, designed for depth sensing, IR illumination, and LiDAR applications. -
Lasermate offers high speed, high reliability, 980nm wavelength, Vertical Cavity Surface Emitting Laser (VCSEL) chip with 1.25/2.5Gbps data rate operation. -
850nm, 10mW, Vertical Cavity Surface Emitting Laser (VCSEL) diode in surface mount (SMD) package with collimating lens designed for use in sensing applications.
-
The VCT-A85A31-OH is an 850nm 10mW VCSEL diode with integrated ball lens and monitor PD in a TO-46 package, supporting high-speed 1Gbps data transmission for communication and precision sensing applications. -
The VCT-A85A4x-3C is a high-performance 2.5Gbps VCSEL operating at 850nm, encased in a durable TO-46 package with a ball lens for superior optical performance. Designed to operate within a temperature range of 0 to 85°C, it is ideal for telecommunications and data communication applications. -
The VCT-F85A4x-4M is a high-performance 4.25Gbps VCSEL operating at 850nm, housed in a durable TO-46 package featuring a flat window for optimal optical output. Designed to operate efficiently within a temperature range of -40 to 85°C, this VCSEL is ideal for integration in challenging environments and applications. -
The VCT-A98A31-3 is a high-performance 980nm VCSEL supporting data rates of 1.25 and 2.5Gbps. Encased in a robust TO-46 package with a ball lens for enhanced optical performance, this VCSEL is perfect for applications requiring reliable light transmission in telecommunications and data communication systems.
-
The VCT-A85A54-10M is a state-of-the-art 10Gbps VCSEL operating at 850nm, designed for exceptional data transmission. Encased in a durable TO-46 package with a ball lens for superior optical quality, it operates efficiently across a temperature range of -40 to 85°C, making it perfect for high-speed telecommunications and data communication applications in demanding environments. -
The VDOE940COB10K is an advanced 940nm VCSEL structured light dot projector with an impressive 1.2W output. Designed with a distinctive 10,980 random dots pattern, this projector enhances depth sensing and 3D imaging capabilities, making it perfect for a wide range of applications. -
The VDOE940COB11K is a powerful 940nm structured light dot projector that delivers 800mW of precision illumination. With its unique 11,664-random dots pattern, this projector is designed for high-performance imaging and 3D scanning, ensuring exceptional detail and accuracy in various applications. Enhance your projects with this advanced tool, ideal for professionals seeking reliable and versatile projection solutions. -
The VDOE940COB15K is a robust 940nm VCSEL structured light dot projector that delivers 1.2W of powerful illumination. With its unique 15,372-random dots pattern, it is expertly designed for high-precision 3D scanning and advanced imaging tasks. Perfect for professionals seeking superior accuracy and reliability, the VDOE940COB15K elevates your projection capabilities to new heights. -
The VCAx-850P15WA is an 850nm 15W pulsed multi-channel VCSEL array, designed for 3D sensing, LiDAR, proximity detection, laser curtains, and medical or biometric applications.
