Fiber Power Meter

Description

The Power Meter is a handy tool mainly used for checking the signal output power of the optical communication equipment in fiber optic networks, especially for FTTH & fiber optical network constructions. It measures the average power of a continuous light beam which is emitted from the equipment or other optic sources. It measures power in both 850 nm / 1300 nm (Multimode) and 1310 nm / 1490 nm / 1550 nm (Single mode) respectively.

The Power Meter consists of a solid state InGaAs photo diode, signal power measurement circuitry, and a 2 Digits / 3 Digits LED display. Users are to connect a fiber cable between the transmission port of the equipment and the universal interface on the Fiber Meter or connect to other light source. The product will show the exact amount of the received power (in dBm).

The universal connector can be used for all the most common fiber interfaces such as ST / SC / FC and it is suitable to test both Single mode and Multimode cables. With an optical 2.5 mm to 1.25 mm adapter, users can even test for 1.25 mm fiber interface.

Features

• Robust, handy design with LED digital readout
• Easy to check Multimode 850 nm / 1300 nm output power
• Easy to check Single mode 1310 nm / 1490 nm / 1550 nm output power
• Universal 2.5 mm to 1.25 mm adaptor for LC or MU connector
• 2 Digits / 3 Digits resolution and Low Voltage Battery warning LED display
• Measuring power in Multimode 850 nm / 1300 nm within -40 dBm ~ +5 dBm ranges
• Measuring power in 3 Digits Single mode 1310 nm / 1490 nm / 1550 nm within -40 dBm ~ +5 dBm ranges

Application

• Installation and Maintenance CATV / Telecom / FTTH in fiber optical fiber networks
• Installation and Maintenance 4G / 5G mobile system
• Installation and Maintenance data center network
• Testing in standard laboratories
• High throughput quality assurance