Visual Fiber Optic Fault Locator, Optical Fiber Checker

Visual Fiber Optic Fault Locator, Optical Fiber Checker

The Visual Fiber Optic Fault Locator, Optical Fiber Checker is a particularly useful tool designed for checking the defects of a fiber cable. It emits a visible 650 nm wavelength red laser light through fiber optic cables, then if there are breaks or defects in the fiber will refract the light, creating a bright glow around the faulty area.

SKU: 38db3767a233 Category:

Description

The Visual Fiber Optic Fault Locator, Optical Fiber Checker is a particularly useful tool designed for checking the defects of a fiber cable. It emits a visible 650 nm wavelength red laser light through fiber optic cables, then if there are breaks or defects in the fiber will refract the light, creating a bright glow around the faulty area. The universal connector can be used for all the most widespread fiber interfaces such as ST / SC / FC connector. It is suitable to test both Single mode and Multimode cables. With an optional 2.5 mm to 1.25 mm optional Adapter, you can easily test 1.25 mm diameter fiber LC or MU connector. The visibility is from 3 km to 5 km dependent upon the output power of the Fiber Checker.

Internally there is also a specifically designed power circuit called an APC (Auto Power Control) circuit which provides steady power. The APC prevents unstable laser output when the battery is low. The LD output signal can be switched to CW or Pulse Mode to obtain different visual effects. There is a dust cap which will prevent dirt from getting into the LD connector. The cover also prevents accidental exposure of the laser beam into anyone’s eyes.

Features

  • Easy to check fiber faults by using 650 nm visual red laser
  • Range: visibility up to 3 ~ 5 km
  • Universal Connector for testing additional ST, SC, FC, MU, and LC interfaces when using our Optional Adapter
  • Operates with both Single mode and Multimode cables
  • Highly effective power circuits designed for stable laser power
  • Operating in both Continuous Wave (CW) & Pulse Mode
  • Dustproof cap keeps fiber connectors clean
  • Powered by two AAA-size alkaline batteries
  • LED indicator for Power On, Battery Low alerts

Application

  • Installation and Maintenance CATV / Telecom / FTTH in fiber optical fiber networks.
  • Installation and Maintenance 4G / 5G mobile system.
  • Installation and Maintenance data center network.
  • Testing in standard laboratories.
  • High throughput quality assurance.

Specifications

Laser Class: Class 2M

Wavelength: 650nm +/-10nm @ 25°C

Spectral Width: <10 nm

Output Power: >0.5mW, >1mW, >5mW @ 25°C into 9um fiber

Mode: Continuous Wave / Pulse Mode

Battery Type: AAA (1.5V x 2)

LED Indicator: GREEN Light – Power On; RED Light – Battery Low

Emitting Range: Visibility to 3~5 km

Operating Temperature: 0~50°C

Storage Temperature: 0~70°C

Weight: 0.06kg

Dimensions: 132mm x 34mm x 19mm

Documentation

DATA SHEET

[PDF] Visual Fiber Optic Fault Locator Technical Specifications and Operating Instructions

Other Products Relating to Visual Fault Locator, Fiber Checker

>Visual Fiber Optic Fault Locator (Pen Style)

Go to Top