|
GMLF- Series >2W
High Power 532nm
Diode Pumped Solid State Lasers
|
|
|
|
|
Laser Head
|
High Power Elite Power Supply
|
High
Power Laboratory Power Supply
|
In
addition, the fiber coupled GMLF- series 532nm lasers with FC or SMA905
connector are also available. If interested, please send
the request to e-mail address paul@lasermate.com
for more detail information.
|
|
Model No.
|
GMLF-532-XFYD
|
GMLF-532-XFYE
|
GMLF-532-XFYA |
|
Wavelength
(nm)
|
532+/-1
|
|
Output
power (mW)
|
>1500 (X=1500),
>2000(X=2000)
|
|
Transverse
mode
|
Near TEM00
|
|
Operating
mode
|
CW
|
|
Power
stability (rms, over 4 hours)
at the Maximum output power
|
<1%
|
<3%
|
<5%
|
|
Warm-up
time (minutes)
|
<10
|
|
M2
factor
|
<2.0
|
|
Beam
divergence, full angle (mrad)
|
<2.0
|
|
Beam
diameter at the aperture (mm)
|
~3.0
|
|
Beam
height from base (mm)
|
45
|
|
Polarization
ratio
|
>100:1
|
|
Pointing stability after
warm-up (mrad)
|
<0.05
|
|
Operating
temperature (oC)
|
10-35
|
|
Expected
lifetime (hours)
|
10,000
|
|
Dimensions
of laser head (mm3)
|
211.5(L)×88(W) ×74(H)
|
|
Net
weight of laser head (kg)
|
1.6
|
|
Power Supply
|
High
Power Elite Power Supply (Y=H): with
complete FDA compliant features, such as the turnkey switch and interlock,
and easy to operate; CW mode with optional TTL modulation up to 10KHz
High
Power Laboratory Power Supply (Y=M): with complete FDA
compliant features, such as the turnkey switch and interlock, and
more functions; CW mode with the
adjustable output power knob, the operating current LED display, and
optional TTL/Analog modulations up to 10KHz
|
|
Power
Supply
Voltage
|
90-240 V AC
|
|
Dimensions
of power supply (mm3)
|
238 (L) ×146(W)
×102 (H) for Y=H; 240
(L) ×146(W) ×108 (H) for Y=M
|
|
Weight
of power supply
(kg)
|
2.3 for
Y=H; 2.6 for Y=M
|
|
Warranty
time
|
10 months
|
|
Remark
|
The stability of output power is promised at the maximum output power
only. The stability of output power may change when you adjust the
output power. For example, the stability of output power at the maximum output power
is <5%, the stability may change to >5% when you adjust the output
power down.
|
|
|
Dimensions: (unit
mm)
Laser Head
High Power Elite Power Supply
(Y=H)
High
Power Laboratory Power Supply (Y=M)
Note: The above specifications are subject to change
without notice.
|
